Visit Transmitters!
Telephone (or Universal)
Transmitter: This multi-purpose transmitter can be activated by the
large press button on the front, an external switch plugged into the socket at
the side, an external switch wired directly to an internal connection terminal,
or, when plugged into a telephone socket, the ringing of the telephone. In
addition, the Telephone Transmitter can also be triggered by an AC or DC voltage
change. The transmitter can be easily set to transmit one of eight different
signal patterns. Powered by a 9V battery.
Monitors: Alarm Clock, Baby, Door, IR Beam,
Telephone, Countdown Timer, Smoke.
Alerts: Acoustic, Vibration,
Strobe.
Monitors:
Alarm Clock, Audio monitor, Baby, Door, Telephone, Repeater.
Alerts: Vibration, Strobe.
Monitors: Telephone. Alerts:
Acoustic.
Monitors:
Telephone. Alerts: Acoustic, Strobe.
Doorbell Transmitter: Monitors
your existing doorbell (mechanical or electrical) by using a microphone pickup,
an inductive pickup coil, or both. The coil sensitivity can be adjusted. The
transmitter can be easily set to transmit one of two different signal patterns.
Powered by a 9V battery.
BabyCry Transmitter: Three levels
of sensitivity can be set as well as a time delay up to 60 seconds before
triggering. A small light on the front flashes so that you can see from a
distance that the BabyCry Transmitter is on and operating.
Powered by two C Cells.
Powered by two C Cells.
Smoke Alarm
Transmitter: Transmits an alarm signal to every Visit receiver in range
regardless of radio channel setting. The light in the test button flashes to
indicate normal battery status. The Smoke Alarm transmitter also sends a warning
signal to the Visit receivers when the battery is low. Smoke detection is by the
Australian Fire Services approved optical method.
Powered by a 9V
battery.
Please note that this smoke
alarm is only battery powered and it may need to be installed as well as a
standard mains powered smoke alarm that you may not be able to hear
:-
it doesn't make a whole bunch of
sense to us, but regulations are regulations....
Countdown
Transmitter: At the end of any period up to 99 hours, the countdown
timer can alert you when that time is up. Great for hair stylists, bakers,
photographers, or anyone relying on timed events. The Countdown Timer can be set
to give one of 8 different alert signals so that up to 8 events can be
timed and recognised by the Visit Receivers.
The Countdown Timer solution
is only available from the original distributors of the Visit Alerting System in
Australia - Phoenix Hearing
Instruments.
Infrared Barrier
Transmitter: Open doorways can be monitored by our unique
solution.
Anything crossing the barrier
will send an alert to Visit Receivers without the annoying acoustic alert that
degrades security.
The Infrared Barrier
solution is only available from the original distributors of the Visit Alerting
System in Australia -
Phoenix Hearing
Instruments.
